Fiat 500 Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey guys. I’ve got a 2012 abarth; the clutch master cylinder push rod keeps slipping off the clutch pedal. I initially thought maybe the plastic bushing was bad. I couldn’t replace that individually, so I replaced the whole master cylinder. That didn’t do it; after a few dozen shifts, the push rod will pop off the pedal. I can pop it back on and it’ll work for a little while before popping back off again. Anybody ever deal with this? Maybe it’s an issue with the pedal?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top